Jeep CHEROKEE 2016 Owner's Manual page 416

414 UNDERSTANDING YOUR INSTRUMENT PANEL
• ParkSense — If Equipped
The Rear Park Assist system will scan for objects behind
the vehicle when the gear selector is in REVERSE and the
vehicle speed is less than 11 mph (18 km/h). The system
can be enabled with Sound Only, or Sound and Display.
To change the Park Assist status, press and release the
"Sound" or "Sound and Display" button.
Refer to "ParkSense Rear Park Assist" in "Understanding
The Features Of Your Vehicle" for system function and
operating information.
• Front ParkSense Volume — If Equipped
Front Park Assist chime volume settings can be selected
from the EVIC/DID or Uconnect System (if equipped).
The chime volume settings include "Low," "Medium,"
and "High." The factory default volume setting is ME-
DIUM.
• Rear ParkSense Volume — If Equipped
Rear Park Assist chime volume settings can be selected
from the EVIC/DID or Uconnect System (if equipped). The
chime volume settings include "Low," "Medium," and
"High." The factory default volume setting is MEDIUM.
• Rear ParkSense Braking Assist — If Equipped
When this feature is selected, the park assist system will
detect objects located behind the vehicle and utilize
autonomous braking to stop the vehicle.
Refer to "ParkSense Rear Park Assist" in "Understanding
The Features Of Your Vehicle" for system function and
operating information.
• Tilt Mirrors In Reverse — If Equipped
When this feature is selected, the exterior sideview
mirrors will tilt downward when the ignition is in the
RUN position and the gear selector is in the REVERSE
position. The mirrors will move back to their previous