To Enter Remote Start Mode; To Exit Remote Start Mode Without Driving The Vehicle - Jeep CHEROKEE 2016 Owner's Manual

To Enter Remote Start Mode

Push and release the REMOTE START button
RKE Key Fob twice within five seconds. The vehicle
doors will lock, the parking lights will flash, and the
horn will chirp twice (if programmed). Then, the
engine will start, and the vehicle will remain in the
Remote Start mode for a 15-minute cycle.
NOTE:
• If an engine fault is present or fuel level is low, the
vehicle will start and then shut down in 10 seconds.
• The park lamps will turn on and remain on during
Remote Start mode.
• For security, power window and power sunroof op-
eration (if equipped) are disabled when the vehicle is
in the Remote Start mode.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33
• The engine can be started two consecutive times with
the RKE Key Fob. However, the ignition must be
on the
cycled by pushing the START/STOP button twice (or
the ignition switch must be cycled to the ON/RUN
position) before you can repeat the start sequence for a
third cycle.
To Exit Remote Start Mode Without Driving The
Vehicle
Push and release the REMOTE START
time or allow the engine to run for the entire 15-
minute cycle.
NOTE: To avoid unintentional shutdowns, the system
will disable with a one time push of the REMOTE START
button for two seconds after receiving a valid
Remote Start request.
2
button one