Parksense Front/Rear Park Assist System - If Equipped; Parksense Sensors; Parksense Warning Display; Parksense Display - Jeep GLADIATOR 2023 Owner's Manual

170 STARTING AND OPERATING
PARKSENSE FRONT/REAR PARK ASSIST
SYSTEM — IF EQUIPPED
The ParkSense Park Assist system provides visual and
audible indications of the distance between the rear
and/or front fascia/bumper and a detected obstacle when
backing up or moving forward (e.g. during a parking
maneuver). For system limitations and usage precautions,
see page 173.
Ú
ParkSense will retain the last system state (enabled or
disabled) from the last ignition cycle when the ignition is
placed in the ON/RUN position.
ParkSense can be active only when the gear selector is in
REVERSE or DRIVE. If ParkSense is enabled at one of
these gear selector positions, the system will remain
active until the vehicle speed is increased to
approximately 7 mph (11 km/h) or above. A warning will
appear in the instrument cluster display indicating the
vehicle is above ParkSense operating speed. The system
will become active again if the vehicle speed is decreased
to less than approximately 6 mph (9 km/h).
P S S
ARK ENSE ENSORS
The four ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the vehicle that is
within the sensors' field of view. The sensors can detect
obstacles from approximately 12 inches (30 cm) up to
79 inches (200 cm) from the rear fascia/bumper in the
horizontal direction, depending on the location, type and
orientation of the obstacle.
The six ParkSense sensors, located in the front
fascia/bumper, monitor the area in front of the vehicle
that is within the sensors' field of view. The sensors can
detect obstacles from approximately 12 inches (30 cm)
up to 47 inches (120 cm) from the front fascia/bumper in
the horizontal direction, depending on the location, type
and orientation of the obstacle.
P S W D
ARK ENSE ARNING ISPLAY
The ParkSense Warning screen is located within the
instrument cluster display page 113. It provides visual
Ú
warnings to indicate the distance between the rear
fascia/bumper and/or front fascia/bumper and the
detected obstacle.
P S D
ARK ENSE ISPLAY
The warning display will turn on indicating the system
status when the vehicle is in REVERSE or when the vehicle
is in DRIVE and an obstacle has been detected.
The system will indicate a detected obstacle by showing a
single arc in one or more regions based on the obstacle's
distance and location relative to the vehicle.
If an obstacle is detected in the center front region, the
display will show a single solid arc in the center front
region with no chime. As the vehicle moves closer to the
obstacle, the display will show the single arc moving closer
to the vehicle and a fast sound tone will be heard and will
change from fast, to continuous.
If an obstacle is detected in the left and/or right front
region, the display will show a single flashing arc in the left
and/or right front region and will produce a fast sound
tone. As the vehicle moves closer to the obstacle, the
display will show the single arc moving closer to the
vehicle and the tone will change from fast to continuous.