To Arm The System; To Disarm The System - Jeep CHEROKEE 2016 Owner's Manual

Hide thumbs Also See for CHEROKEE 2016:

Table of Contents

20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

off after three minutes, turn all of the visual signals off

after 15 additional minutes, and then the Vehicle Security

Alarm will rearm itself.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:

1. Make sure the vehicles ignition is cycled to the "OFF"

position (refer to Starting Procedures in Starting

And Operating for further information).

• For vehicles equipped with Keyless Enter-N-Go —

Passive Entry, make sure the vehicles keyless igni-

tion system is OFF.

• For vehicles not equipped with Keyless Enter-N-Go

— Passive Entry, make sure the vehicle ignition

system is OFF, and the key is physically removed

from the ignition.

2. Perform one of the following methods to lock the

button on the interior power door

lock switch with the driver and/or passenger

• Push the LOCK

Entry Door Handle with a valid RKE Key Fob

available in the same exterior zone (refer to Key-

less Enter-N-Go — Passive Entry in Things To

Know Before Starting Your Vehicle for further

information).

• Push the LOCK

3. If any doors are open, close them.

The Vehicle Security Alarm can be disarmed using any of

the following methods:

• Push the UNLOCK

button on the exterior Passive

button on the RKE Key Fob.

Table of Contents