Using Homelink; Security; Troubleshooting Tips - Jeep CHEROKEE 2016 Owner's Manual

Hide thumbs Also See for CHEROKEE 2016:

Table of Contents

292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

2. Push and hold the desired HomeLink button until the

indicator light begins to flash after 20 seconds. Do not

release the button.

"Canadian/Gate Operator Programming" step 2 and

follow all remaining steps.

Using HomeLink

To operate, push and release the programmed HomeLink

button. Activation will now occur for the programmed

device (i.e. garage door opener, gate operator, security

system, entry door lock, home/office lighting, etc.) The

hand-held transmitter of the device may also be used at

It is advised to erase all channels before you sell or turn

in your vehicle.

To do this, push and hold the two outside buttons for 20

seconds until the red indicator flashes.

NOTE: All channels will be erased. Individual channels

cannot be erased.

The HomeLink Universal Transceiver is disabled when

the Vehicle Security Alarm is active.

If you are having trouble programming HomeLink, here

are some of the most common solutions:

• Replace the battery in the Garage Door Opener hand-

held transmitter.

• Push the LEARN button on the Garage Door Opener

to complete the training for a Rolling Code.

• Did you unplug the device for programming and

remember to plug it back in?

Table of Contents