Hazard Warning Flashers; If Your Engine Overheats - Jeep CHEROKEE 2016 Owner's Manual

Hide thumbs Also See for CHEROKEE 2016:
Table of Contents

Advertisement

HAZARD WARNING FLASHERS

The Hazard Warning flasher switch is located in the
switch bank below the radio screen.
Push the switch to turn on the Hazard Warning
flasher. When the switch is activated, all direc-
tional turn signals will flash on and off to warn oncoming
traffic of an emergency. Push the switch a second time to
turn off the Hazard Warning flashers.
This is an emergency warning system and it should not
be used when the vehicle is in motion. Use it when your
vehicle is disabled and it is creating a safety hazard for
other motorists.
When you must leave the vehicle to seek assistance, the
Hazard Warning flashers will continue to operate even
though the ignition is placed in the OFF position.
NOTE: With extended use the Hazard Warning flashers
may wear down your battery.
WHAT TO DO IN EMERGENCIES 627

IF YOUR ENGINE OVERHEATS

In any of the following situations, you can reduce the
potential for overheating your engine by taking the
appropriate action.
• On the highways — slow down.
• In city traffic — while stopped, put transmission in
NEUTRAL, but do not increase engine idle speed.
CAUTION!
Driving with a hot cooling system could damage
your vehicle. If the temperature gauge reads "H,"
pull over and stop the vehicle. Idle the vehicle with
the air conditioner turned off until the pointer drops
back into the normal range. If the pointer remains on
the "H" and you hear continuous chimes, turn the
engine off immediately and call for service.
6

Advertisement

Table of Contents
loading

Table of Contents