Led Status Indicator Panel - Motorola AP 7181 Installation Manual

18
WARNING!

2.10.2 LED Status Indicator Panel

There are six LEDs on the AP 7181 which can be viewed through the light pipes on the bottom of the unit. The LEDs
have the following display characteristics and functionality:
LED 1
Blinking Red
indicates
booting. Solid normal GE1
Red defines a operation.
failure
condition.
White
defines
normal
operation.
When disconnecting the antenna cables from the unit or removing an antenna panel
and replacing it with a blank panel, terminators MUST be placed on the unused
horizontal and vertical connectors on the top of the unit. The terminators on the AP
7181 are Ingress Protection 68 (IP68) rated. No additional weatherproofing
precautions are required.
LED 2 LED 3
Green Green
defines defines
normal GE2
operation.
Yellow Yellow
defines a defines a
collision. collision.
LED 4 - 5 GHz LED 5 - 2.4 GHz
Amber Emerald
defines 5 GHz defines 2.4
radio as GHz radio as
configured. configured.
AP 7181 Access Point
LED 6
Not used.