Dismantling And Disposal; Dismantling And Reinstallation; Disposal - Sirona orthophos xg 3 Operating Instructions Manual

9 Dismantling and disposal
9.1 Dismantling and reinstallation
72
9

Dismantling and disposal

9.1

Dismantling and reinstallation

When dismantling and reinstalling the system, proceed according to the
installation instructions for new installation in order to guarantee its proper
functioning and stability.
The X-ray unit must be recalibrated whenever structural alterations in the
area surrounding the X-ray room or new installations have been
performed.
9.2

Disposal

In accordance with Directive 2012/19/EU and national disposal
Environmentally sound disposal
regulations regarding old electrical and electronic devices, please be
advised that such items must be disposed of in a special way within the
European Union (EU). These regulations require environmental friendly
usage/disposal of old electrical and electronic devices. Such items must
not be disposed of as domestic refuse. This has been expressed using
the icon of the "crossed out trash can" since March 24, 2006, amongst
other methods.
Please observe the disposal regulations applicable in your country.
Disposal procedure
We advise that this product is subject to the stipulations in EC guideline
2002/96 governing waste electrical and electronic equipment and must
be disposed of in line with these special requirements within the
European Union (EU).
Prior to disassembly / disposal of the product, it must be fully prepared
(cleaned / disinfected / sterilized).
When disposing of equipment permanently, please proceed as follows:
In Germany:
To initiate return of the electrical device, please send a disposal order to
"enretec GmbH".
1. You can find a form for placing a disposal order on the company's
homepage (www.enretec.de) under the menu item "Entsorgung
elektrischer und elektronischer Geräte" (Disposal of electric and
electronic devices). The form can either be downloaded or completed
online.
2. Fill out the form with the corresponding details and send it either as
an online order or fax it to enretec GmbH at +49(0)3304 3919 590.
You can also get in touch with the following contacts for disposal
orders and any questions relating to this you may have:
Phone: +49(0)3304 3919 500;
E-mail: pickup@eomRECYCLING.com
Mailing address: enretec GmbH, Geschäftsbereich eomRECYCLING
Kanalstrasse 17, 16727 Velten
Sirona Dental Systems GmbH
Operating Instructions ORTHOPHOS XG 3
60 50 681 D3352
D3352.201.05.18.02 04.2016