Inspection And Maintenance - Sirona orthophos xg 3 Operating Instructions Manual

6 Maintenance
6.2 Inspection and maintenance
60
6.2

Inspection and maintenance

Inspection and preventive maintenance must be performed at scheduled
intervals to protect the health and safety of patients, users and other
persons.
The information provided in the document
Orthophos XG 3D inspection and maintenance document
and safety-related checks"
document can be downloaded at http://www.sirona.com/manuals.
Annual inspection
Inspection and maintenance
In order to ensure the operational safety and functional reliability of your
product, you as the system owner should check the equipment at regular
intervals (at least once a year) or commission your dental depot to do so.
Maintenance by the service engineer
In addition to the annual check to be carried out by the system owner or
authorized persons, preventive maintenance must be performed after 4,
7 and 10 years, and then at two-year intervals.
Image quality check
Digital image quality
The image quality should be assessed by the system owner at regular
intervals, at least once a year.
On digital image receptor systems, the degree of postprocessing
(brightness or contrast adjustment) that is required in the image
processing software (e.g. SIDEXIS) to produce satisfactory results is
used as an assessment criterion.
If, after taking into account the patient's anatomy and excluding possible
Assessment criteria
sources of error such as incorrect patient positioning, this criterion seems
to apply, immediately contact a service engineer to have potential system
faults repaired.
Country-specific requirements
Country-specific requirements
Observe any possible additional country-specific requirements.
Sirona Dental Systems GmbH
Operating Instructions ORTHOPHOS XG 3
"Inspection and maintenance
REF 59 87 685 should be helpful here. The
D3352.201.05.18.02 04.2016
60 50 681 D3352