F-Code Transmission And Polling - Konica Minolta 5600 Operator's Manual

Beyond the basics
6
Press .
ENTER
If you've entered an incorrect
and returns to standby mode.
If you've entered the correct
03:Erase F-Code Box
Check Program/Enter
Note: If you want to quit without erasing the F-Code box you've selected,
press /
PROGRAM
Note: If you want to quit without erasing any F-Code box, press
The machine returns to standby mode.
7
Press to erase the F-Code box.
ENTER
03:Erase F-Code Box
** Complete
To erase another F-Code box, repeat steps 2-7.
To finish, press .
STOP

F-Code transmission and polling

With F-Code, your machine can send secure transmissions, perform relay broadcast
initiations and even poll from other
facturer.
You can do this two ways:
• Using the programmable one-touch key (see pages 2.44-2.57)
• Entering the - sub-address and password directly, which is what we'll
ITU T
describe here.
Note: For F-Code communication to work, three things must be true:
• The remote fax machine must support
• The remote fax must have a mailbox with an
on it
• You must know the
ITU
remote machine's mailbox
F-Code transmission
1
Insert the document.
2
Adjust the resolution and contrast if necessary.
2.42
. . code, your fax machine rejects the attempt
I D
. . code, the display shows:
I D
. The fax will return to step 2.
**
- -equipped machines, regardless of manu-
ITU T
- sub-addressing
ITU T
- sub-address created
ITU T
- sub-address and password (if any) for the
T
3
If you want to toggle between manual transmission and memory transmis-
sion, press
4
Press
COM
Enter Sub-Address
_
5
Use the numeric keypad to enter the appropriate sub-address in the remote
machine. In this example, we've entered 123456.
Enter Sub-Address
.
STOP
123456_
Note: If you make a mistake, press
enter the correct number.
6
Press
ENTER
Enter Password
_
Note: If this sub-address does not have a password, skip to step 8.
7
Use the numeric keypad to enter the password. In this example, we've
entered 654321.
Enter Password
654321_
8
Press
ENTER
Enter Fax Number
_
9
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
10
What you do now depends on when you want the transmission to begin.
• To have it begin now, skip to step 13.
• To delay it, go on to step 11.
11
Press
COM
Delayed
Enter Time: 15/17:05
12
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
.
MEMORY TRANSMIT
- five times and then press
OPTIONS ENTER
to erase the character, then
CANCEL
. The shows:
LCD
. The shows:
LCD
- , . The shows:
OPTIONS ENTER LCD
.
ENTER
.
.
START