Ethernet Switch Settings - Sony CCP-8000 System Setup Manual

3-4. Ethernet Switch Settings

The following Ethernet switches are tested to MVS-8000 system.
Recommended models
Vendor Model name
Cisco Catalyst 29xx-XL
Cisco Catalyst 35xx-XL
Cisco Catalyst 4000 series
Cisco Catalyst 5000 series
* : Please confirm the details of a recommendation model 1 to a Cisco agency.
The Ethernet switch for MVS-8000 system requires the following settings
Follow the flowchart below to setup Ethernet switch.
1. Initialize Ethernet switch
(Required minimum settings)
2. Set VLAN
(Depending on the customer's system situation)
Procedure of setup ethernet switch
C29xx-XL/35xx-XL series
Initial setting
IP Address setting
etc
Disable CDP
More than
No
one LAN are connected
to one Ethernet
switch
VLAN setting
Disable
Spanning Tree
MVS-8000 System
SYSTEM SETUP
Ethernet switch
Yes
Start
C4000/5000 series
IP Address setting
Disable VTP
VLAN setting
Disable
Spanning Tree
Assign Sc0
to VLAN
Disable CDP
End
3-4. Ethernet Switch Settings
3-5