Sony CCP-8000 System Setup Manual page 75

No. Destination Bus * * * * *
85 M/E-2 Dme Key
86 M/E-2 Ext Dme
87 M/E-3 Bkgd A
88 M/E-3 Bkgd B
89 M/E-3 Utility 1
90 M/E-3 Utility 2
91 M/E-3 Key 1 Fill
92 M/E-3 Key 1 Source
93 M/E-3 Key 2 Fill
94 M/E-3 Key 2 Source
95 M/E-3 Key 3 Fill
96 M/E-3 Key 3 Source
97 M/E-3 Key 4 Fill
98 M/E-3 Key 4 Source
99 M/E-3 Dme Video
100 M/E-3 Dme Key
101 M/E-3 Ext Dme
102 P/P Bkgd A (DSK Bkgd 1)
103 P/P Bkgd B (DSK Bkgd 2)
104 P/P Utility 1
105 P/P Utility 2 (DSK Bkgd 3)
106 P/P Key 1 Fill
107 P/P Key 1 Source
108 P/P Key 2 Fill
109 P/P Key 2 Source
110 P/P Key 3 Fill
111 P/P Key 3 Source
112 P/P Key 4 Fill
113 P/P Key 4 Source
114 P/P Dme Video (DSK Bkgd 4)
115 P/P Dme Key
116 P/P Ext Dme
117 DME Utility 1
118 DME Utility 2
119 Frame Memory Source 1
120 Frame Memory Source 2
121 Reserved
122 Reserved
123 DME 1 Video
124 DME 1 Key
125 DME 2 Video
126 DME 2 Key
127 DME 3 Video
MVS-8000 System
SYSTEM SETUP
No. Destination Bus * * * * *
128 DME 3 Key
129 DME 4 Video
130 DME 4 Key
131 DME 5 Video
132 DME 5 Key
133 DME 6 Video
134 DME 6 Key
135 DME 7 Video
136 DME 7 Key
137 DME 8 Video
138 DME 8 Key
* : To switch the XPT from the S-Bus remote control, select the corre-
sponding bus number.
** : This is the output (bus) that is set by the Output Assign of the switcher
setup. Among the buses of AUX 1 to 48, Edit PVW and DME Monitor,
only the buses that are set by the Output Assign, are controlled.
3-7. Tally Setup
3-19