Installing The Aux Panel; Installing The Menu Panel - Sony CCP-8000 System Setup Manual

2-4-3. Installing the AUX Panel

n
When installing the AUX panel into the control console, be
sure to install it with two persons or more.
Install the AUX panel by following the procedure de-
scribed below.
Tools required
. Screws (RK5 x 16) :
. Ornamental washer for rack mount : 4 pcs
(Sony part No. : 2-297-913-01)
1. Hold the AUX panel with the two persons or more and
install the main panel into the control console.
2. Fix the AUX panel to the control console with the
screws.
RK5 x 16
Washer
AUX panel
MVS-8000 System
SYSTEM SETUP

2-4-4. Installing the Menu Panel

Tools required
. Screws (B4 x 6) :
. Screws (B3 x 5) :
. EL table assemblies : 2 pcs (Sony Part No. : X-3167-779-1)
1. Open the screw holes (M4) as shown in the illustration
4 pcs
2. Install the EL table assemblies to the screw holes that
RK5 x 16
Washer
3. Install the menu panel using the four screws (B3 x 5).
4 pcs
4 pcs
into the positions to which the menu panel is going to
be installed.
are opened in step 1 using the four screws.
EL table assemblies
B4 x 6
378 mm
EL table assemblies
B3 x 5
Menu panel
2-4. CCP-8000 Installation
B4 x 6
68.5 mm
B3 x 5
2-9