Related Manuals for Sony MVE-8000
Summary of Contents for Sony MVE-8000
- Page 1 DME PROCESSOR PACK MVE-8000 MULTI FORMAT DME PROCESSOR MKS-8800 MKS-8810M MKS-8820M MKS-8830M OPERATION MANUAL [English] 1st Edition (Revised 1)
- Page 2 When using a LAN cable: For safety, do not connect to the WARNING connector for peripheral device wiring that might have excessive voltage. To prevent fire or shock hazard, do not expose the unit to rain or moisture. VORSICHT To avoid electrical shock, do not open the Um Feuergefahr und die Gefahr eines cabinet.
- Page 3 To guarantee safe long-term operation, periodic inspections Directive sur la compatibilité électromagnétique (EMC) (89/ are recommended. Please contact your Sony representative 336/CEE) et à la Directive sur les basses tensions (73/23/ for detailed information about the content and cost of periodic CEE) émises par la Commission de la Communauté...
-
Page 4: Table Of Contents
Table of Contents Overview ................5 Features..................5 Overview of the MVE-8000 Components......... 5 Location and Function of Parts........... 6 Front Panel................6 Rear Panel................. 7 Example System Configuration .......... 9 MVS-8000 System Configuration ..........9 Flow of Video Signals ............10 Power Supply Unit Status Indicator........ -
Page 5: Overview
DME operations can be controlled from the MVS-8000 system’s center control panel. configured around an MVS-8000 Multi Format Switcher System. The MVE-8000 is a generic name of the DME processor Overview of the MVE-8000 unit having option boards installed in it. Components... -
Page 6: Location And Function Of Parts
Note If the status indicator does not light when you turn the POWER switch on, there may be a fault in the power circuits. Turn the POWER switch off and contact your Sony service representative. Location and Function of Parts... -
Page 7: Rear Panel
EDITOR connector (D-sub, 9-pin, RS-422A) If you are connecting a second MVE-8000 Multi Format DME Processor to the MVS-8000, connect the Connect to control this unit from a BVE-9100 or other SWITCHER A and B connectors on the second processor editing control system. - Page 8 * For information about Ethernet switches that can be used in an MVS system, contact your Sony service representative. For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the switch.
-
Page 9: Example System Configuration
Example System Configuration MVS-8000 System Configuration Reference video signal Ethernet switch Ethernet switch DATA LAN CTRL EDITOR MVE-8000 DME Processor Pack BVE-9100 Editing Control System Reference video signal CTRL DATA CTRL REMOTE 1 PERIPH MKS-8010 System REMOTE DATA Control Unit... -
Page 10: Flow Of Video Signals
Flow of Video Signals MVE-8000 DME Processor Pack SWITCHER B SWITCHER A Reference video signal 100 to 240 V AC power supply Reference video signal DME 1B DME 1A 100 to 240 V AC power supply 100 to 240 V AC power supply... -
Page 11: Power Supply Unit Status Indicator
Power Supply Unit Status Indicator The power supply unit status indicator shows the status of the power supply unit during operation and when the unit is powered on. Whenever a power error is detected, it is reflected immediately by the indicator. Meaning of status indicator displays Indicator Status... -
Page 12: Specifications
EDITOR D-sub 9-pin, female Specifications Complies with RS-422A standard Data transfer rate: 38.4 Kbps D-sub 25-pin, female TTL inputs: 8 The following specifications show the reference Relay contact outputs: 4 performance for this unit and individual option boards. (30 V AC/DC, 0.1 A) Open collector outputs: 4 Design and specifications are subject to change without notice. -
Page 13: Mks-8820M Input/Output Board
MKS-8820M Input/Output Board General Power requirements 12 V DC Power consumption Approx. 4.1 A Dimensions (w/d) VIF board: 317×380 mm ×15 inches) CN board: 278×94 mm (11×3 inches) Mass Approx. 1.4 kg (3 lb 1 oz) Video signal inputs and outputs SWITCHER A, SWITCHER B Connectors: MDR 68-pin Signal format: LVDS (special format) - Page 14 Specifications...
- Page 15 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
- Page 16 Sony Corporation B & P Company MVE-8000 Printed in Japan http://www.sony.net/ (WW) 2001.09.13 3-206-007-02 (1) © 2001 Printed on recycled paper...