Sony CCP-8000 System Setup Manual page 14

1-3. System Description
n
The MVE-8000 has a built-in cooling system consisting of four fans in total mounted on the rear and right
side of the frame, and an air filter on the rear of the front panel. Cooling air is drawn in at the front side of
the frame, through the filter, boards, and modules, and then expelled out the rear and right side of the
frame at the fan unit.
If dust is accumulated at the intake of the fan or the cables doesn't keep off over 10 cm from the fans, air
is prevented from flowing smoothly that result in rise of temperature inside the machine. It may result in
adverse effects on performance and life of the machine.
MVE-8000
DME Processor Pack
The MVE-8000 has the slots for plug-in boards in its front and rear. It contains of 6 slots in total for
standard/option boards.
n
The MVE-8000 is shown below with the front panel removed. The front panel must remain in place and
closed during normal system operation to keep maximum cooling efficiency.
MVE-8000
DME Processor Pack
Slots on
the front side
1-10
Fans
1
2
5
6
Fans
MVS-8000 System
SYSTEM SETUP