Mvs-8000 System Example - Sony CCP-8000 System Setup Manual

1-4. MVS-8000 System Example

1-4. MVS-8000 System Example
Ethernet switch
(*1)
Reference video
signal (*2)
DATA CTRL REMOTE 1
Switcher Processor Pack
MVS-8400/8300/8200
(*1) : Connect each LAN (CTRL, DATA) to the separate Ethernet switches respectively.
However, a single Ethernet switch can be used for connecting each LAN.
For information about Ethernet switches that can be used in an MVS system, contact your local Sony Sales Office/Service Center.
For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the switch.
(*2) : Terminate the system with the 75 Z terminator supplied. The 75 Z terminator is supplied with the equipment.
1-24
Reference video signal (*2)
Ethernet switch
(*1)
Reference video
signal (*2)
VTR
CTRL EDITOR
DATA LAN
Editing Control System
CTRL
REMOTE DATA
BKS-R series
HDS-X series
Device Control Unit Pack DCU-8000
DDR
DME Processor Pack
MVE-8000
BVE-9100
PERIPH
System Control Unit
MKS-8010
PERIPH
Reference video
signal (*2)
Audio mixer
Crossover cable
BNC cable
MVS-8000 System
SYSTEM SETUP