Factory Reset; Reset Via Lcd Menu - Grandstream Networks GVC3200 Administration Manual

Users could reset GVC3200/GVC3202 to factory settings via the following ways:


Reset via LCD menu


Reset via GVC3200/GVC3202 web UI

Reset via the reset pin hole on the back panel of GVC3200/GVC3202.
Factory reset will delete configuration information and syslog information.
--------------------------------------------------------------------------------------------------------------------- -----------------------
Warning:
1. Factory reset will erase all GVC3200/GVC3202 configuration information. Please back up all settings
or print useful information before making the following operations. If users lose all parameters or records,
Grandstream will not take responsibility for the damage or loss.
2. After factory reset, the remote control will not be paired to GVC3200/GVC3202 anymore. Please go to
GVC3200/GVC3202 LCD settings->Network->Bluetooth, select the menu button on the upper right and
click "Search New Devices". GVC3200/GVC3202 remote control "GS-RCU" followed by the last 4 digits
of the remote control's MAC address will show in the available device list. Select it to start pairing
process on GVC3200/GVC3202, immediately followed by pressing OK+5 keys on the remote control
at the same time. The remote control will be paired and connected to GVC3200/GVC3202 again.
--------------------------------------------------------------------------------------------------------------------- -----------------------
Reset Via LCD Menu
Go to GVC3200/GVC3202 LCD idle screen->Settings->Maintenance->Factory Reset, click on the "Reset"
button to bring up the prompt box as shown below. Click "OK" to reboot the device and restore factory
settings.

FACTORY RESET

GVC3200/3202 Administration Guide
P a g e | 76