Grandstream Networks GVC3200 Administration Manual page 63

It is used to set the prefix characters for the configuration files. If it is configured, only
Config File Prefix
the firmware with the matching encrypted prefix will be downloaded and flashed into
the device system.
It is used to set the prefix characters for the configuration files. If it is configured, only
Config File
the firmware with the matching encrypted postfix will be downloaded and flashed into
Postfix
the device system.
The password for encrypting the XML configuration file using OpenSSL. The
XML Config File
Password password is to decrypt the XML configuration file if it is encrypted via OpenSSL.
It is used to set if the device authenticates the configuration file before applying it. If it
Authenticate set to "Yes", the configuration file must include value P1 with device's administration
Conf File password. If it is missed or does not match the password, the device will not apply the
configuration in the config file. The default setting is "No".
It is used to download the device configuration file in text format. The config file
Download Device
includes all the P value parameters for device's current settings except password for
Configuration
security purpose.
Always send It is used to set if the device includes the credential information in the HTTP/HTTPS
HTTP Basic request messages to download the cfg.xml file. If it is set to "Yes ", the credential
Authentication information will always be included in the HTTP/HTTPS messages regardless the
server's challenge. The default setting is "No".
Information
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "Check Every
Automatic Day". If set to "Check Every Day", "Check Every Week" or "Check at a Period Time",
Upgrade fill in time interval below for upgrade. The shortest time interval is 60 minutes. If set to
"No", only upgrade when reboot the device.
Defines the hour of the day (0-23) to check the HTTP/TFTP server for firmware
Hour of the Day
upgrades or configuration files changes. This option is available when "Automatic
(0-23)
Upgrade" is set to "Check Every Day ". The default setting is "1".
Day of the Week Defines the day of the week to check the HTTP/TFTP server for firmware upgrades
(0-6) or configuration files changes. The default setting is "1".
It is used to define the rules for automatic upgrade on the device.
It can be selected from the following:
Firmware
 Always Check at bootup
Upgrade and
 Always Check at bootup, when F/W pre/suffix changes,
Provisioning
 Skip the Firmware Check.
The default setting is "Always Check at bootup".
GVC3200/3202 Administration Guide
P a g e | 63