Grandstream Networks GVC3200 Administration Manual page 58

It is used to set if the device will automatically fill in the first three octets to make an
outbound IP call regardless of subnet mask. If it is set to "Yes", users can dial an IP
address under the same LAN/VPN segment by entering the last octet in the IP address
from its local IP address. The port number used for the target IP address is 5060 by
Use Quick IP-call
default. Please note the leading 0 in the last octet needs to be omitted.
mode
For example, to make direct IP call to aaa.bbb.ccc.XXX, dial XXX on device directly.
No SIP server is required to make quick IP call. The default setting is "No".
It is used to reduce video distortion. If set to "Yes", the GVC3200/3202 will skip the P
Enable Frame
Skipping in Video frame in lost video packet to decode I frame in the next video packet. The default
Decoder setting is "No".
It is used to set what characters will be included in the SIP INVITE URI if end users
Escape '#' as %23
input #. If it is set to "Yes", the device will replace the # by %23. Otherwise, it will
in SIP URI
include # in the SIP INVITE message. The default setting is "Yes".
GVC3200/3202 Administration Guide
P a g e | 58