Grandstream Networks GVC3200 Administration Manual page 66

It is used to select the log priority to display. It can be selected from the following:
 Verbose
 Debug
 Info
 Warn
Log Priority
 Error
 Fatal
 Silent (suppress all output)
The default setting is "Verbose".
Debug
Press the START button to start capturing a trace, and press STOP to stop the capture
Capture Trace
process. The default setting is close.
Selects the existing capture file. Press the DELETE button on the right to delete the
Trace List
file.
Click the LIST button to view the traces, which are listed according to time when the
View Trace traces were captured. Click the trace name to download it to PC. The captures files
are saved in FileManager->SD Card->ppp file.
Syslog
Syslog Server
The URL/IP address for the syslog server.
Address
Selects the level of logging for syslog. The default setting is "None". There are 4 levels:
DEBUG, INFO, and WARNING AND ERROR. Syslog messages are sent based on
the following events:
1. Product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. Sent or received SIP message (DEBUG level)
Syslog Level
4. SIP message summary (INFO level)
5. Inbound and outbound calls (INFO level)
6. Registration status change (INFO level)
7. Negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. Memory exception (ERROR level)
If set to "Yes", the device will send SIP log in the syslog messages. The default setting
Send SIP Log
is "No".
GVC3200/3202 Administration Guide
P a g e | 66