Provisioning And Configuration File Download; Remote Control Upgrade - Grandstream Networks GVC3200 Administration Manual

Provisioning and Configuration File Download

Grandstream SIP Devices can be configured via the Web Interface as well as via a Configuration File
(binary or XML) through TFTP or HTTP/HTTPS. The "Config Server Path" is the TFTP, HTTP or HTTPS
server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format.
The "Config Server Path" can be the same or different from the "Firmware Server Path". A configuration
parameter is associated with each particular field on the web configuration page. A parameter consists of a
Capital letter P and 2 to 4 digit numeric numbers. i.e., P2 is associated with the "Admin Password" in the
Web GUI->Maintenance->Web/SSH Access page. For a detailed parameter list, please refer to the
corresponding firmware release configuration template in the following link:
http://www.grandstream.com/support/tools
When the GVC3200/GVC3202 boots up, it will issue TFTP or HTTP request to download a configuration
XML file named "cfgxxxxxxxxxxxx" followed by "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC
address of the device, i.e., "cfg000b820102ab" or "cfg000b820102ab.xml". If downloading
"cfgxxxxxxxxxxxx.xml" file is not successful, the provision program will download a generic cfg.xml file. The
configuration file name should be in lower case letters.
For more details on XML provisioning, please refer to the following document:
http://www.grandstream.com/sites/default/files/Resources/gs_provisioning_guide.pdf
Users could find XML configuration file generator tool and user guide in the following web page. Please use
the XML configuration file generator to generate the XML configuration file for your devices' provisioning.
http://www.grandstream.com/support/tools

Remote Control Upgrade

The GVC3200/GVC3202 remote control firmware is embedded with GVC3200/GVC3202 firmware. When
GVC3200/GVC3202 detects a new firmware version for the connected Bluetooth remote control, a prompt
box will pop up on screen to remind users whether to upgrade the remote control. Tap on OK to upgrade,
or tap on CANCEL to reject.
Users could also check remote control firmware update manually in LCD menu->Settings->Status->Remote
Control and click "Check for Updates". If there is a new version, follow the prompts on the screen to
download remote control update and upgrade. Network connection and remote control connection will be
temporarily lost during remote control upgrade. Both connections will be restored automatically once
upgrading is done.
P a g e | 74
GVC3200/3202 Administration Guide