Maintenance; Maintenance/Upgrade - Grandstream Networks GVC3200 Administration Manual

Maintenance

Maintenance section lists Upgrade, Recording, Time & Language, Troubleshooting and Reboot.

Maintenance/Upgrade

Parameters Descriptions


Complete
Upgrade
For example: if the device can't fully boot-up but the user still login web UI, please
enable this feature to recover the system.
Upload Firmware
Manually upload firmware file from PC to the device system directly.
File to Update
It is used to set the upgrading protocol for the device to retrieve firmware file. It can
Firmware
Upgrade Mode be selected from TFTP, HTTP and HTTPS. The default setting is HTTPS.
Firmware
It is used to type the user name for the HTTP/HTTPS server authentication for
HTTP/HTTPS
firmware server.
Username
Firmware
It is used to type the password for the HTTP/HTTPS server authentication for firmware
HTTP/HTTPS
server.
Password
Firmware Server
It is used to define the server path for upgrading the firmware. It can be different from
Path the Config Server Path. Default setting is "fm.grandstream.com/gs".
It is used to set the prefix characters for the firmware files. If it is configured, only the
Firmware File
firmware with the matching encrypted prefix will be downloaded and flashed into the
Prefix
device system. It allows the ITSP to lock firmware updates.
It is used to set the post characters for the firmware files. If it is configured, only the
Firmware File
firmware with the matching encrypted postfix will be downloaded and flashed into the
Postfix
device system. It allows the ITSP to lock firmware updates.
Config Upgrade It is used to set the provisioning protocol for the device to retrieve the config file. It can
Mode be selected from TFTP, HTTP and HTTPS. The default setting is HTTPS.
Config
It is used to type the user name for the HTTP/HTTPS server authentication for config
HTTP/HTTPS
server.
Username
Config
It is used to type the password for the HTTP/HTTPS server authentication for config
HTTP/HTTPS
server.
Password
Config Server
It is used to define the server path for provisioning the configuration file. It can be
Path different from the Firmware Server Path. Default setting is "fm.grandstream.com/gs".
When set to "Yes", the device will keep the user data and replace all other files.
When set to "No", the device will compare the firmware file and only replace the
part that has update. The default setting is "No".
GVC3200/3202 Administration Guide
P a g e | 62