Status; Status/Account Status; Status/Peripheral Status; Figure 5: Gvc3200 Web Ui Status->Peripheral Status - Grandstream Networks GVC3200 Administration Manual

It is used to configure the entry information to be shown on phone's LCD. Up to 3 fields
LDAP Displaying
can be displayed.
Name Attributes
Example:
%cn %sn %telephoneNumber
It is used to configure the maximum number of results to be returned by the LDAP
Max Hits
server. If set to 0, server will return all search results. The default setting is 50.
Search Timeout
It is used to configure the interval (in seconds) for the server to process the request
(ms)
and client waits for server to return. The default setting is 4000 seconds.
LDAP Lookup
It is used to set if allow the phone system to do the LDAP number searching when
When Dialing
making outgoing calls. The default setting is "No".
Search LDAP For
It is used to set if allow the phone system to do LDAP number searching for incoming
Incoming Call
calls. The default setting is "No".

Status

The Status page lists Account Status, Peripheral Status, Network Status, System Info and Remote Control
status. Please also refer to chapter Status in

Status/Account Status

Parameters Descriptions
Account It lists the accounts available on device.
It displays the SIP User ID of the account (if applicable).
Number
SIP Server It displays the SIP server address for the account (applicable to SIP account only).
Status It shows the registration status of the account: Registered or Unregistered.

Status/Peripheral Status

Connection status for each interface is displayed with different icons here. The icon in green indicates
"Connected" and the icon in grey means "Not Connected".
GVC3200/GVC3202 LCD
Figure 5: GVC3200 Web UI Status->Peripheral Status
Figure 6: GVC3202 Web UI Status->Peripheral Status
GVC3200/3202 Administration Guide
SETTINGS.
P a g e | 69