Serv Byp (Service Bypass) Menu; Versions Menu - Bosch B9512G Installation And System Reference Manual

Control Panels
3.
4.
5.
6.
20.4

[4] Serv Byp (Service Bypass) menu

In this menu, you can edit the Service Bypass points.
Service Bypass
B91x/B92x keypads use of Service Bypass to bypass points
1.
2.
3.
4.
5.
B93x/B94x keypads use of Service Bypass to bypass points
1.
2.
3.
4.
5.
20.5

[5] Versions menu

Use the Versions menu to view control panel version information.
Versions
B91x/B92x keypads use of Versions
1.
2.
3.
Bosch Security Systems, Inc.
Press /[NEXT]. The keypad shows the Cloud configuration, which is one of the
following:
– Not Available
– Enabled on Ethernet
– Enabled on Cellular
– Enabled on Ethernet and Cellular
Press /[NEXT]. The keypad shows the Cloud Certificate status, which is one of the
following:
– Not Installed
– Certificate Valid
Press /[NEXT]. The keypad shows the Cloud state, which is one of the following:
– Connected (and through which method)
– Not Ready
– Disconnected
– Not Available
– Trying to Connect
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [4] Srvc Byp. If no points have been bypassed the keypad shows No points
bypassed. If points are bypassed, the keypad lists the number of bypassed points.
Enter number for the point to bypass, and then press [ENTER] to select the point.
Press [ENTER] to bypass the point. The keypad shows Parameter Saved, and then returns
to the point you just bypassed.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [4] Srvc Byp menu. If no points have been bypassed the keypad shows No points
bypassed. If points are bypassed, the keypad lists the number of bypassed points.
Enter number for the point to bypass, and then press [ENTER].
Press [Bypass] to bypass the point. The keypad shows Parameter Saved, and then returns
to the point you just bypassed.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [5] Versions.
Use [PREV] or [NEXT] to cycle through the list of items for which you can view the
version.
Installation and System Reference Guide
Keypad Installer menu | en 161
2016.06 | 08 | F.01U.303.996