Serv Byp (Service Bypass) Menu; Versions Menu - Bosch B5512 Reference Manual

Control Panel
B91x/B92x keypads use of IP Camera
1.
2.
3.
B93x/B94x keypads use of IP Camera
1.
2.
3.
19.4

[4] Serv Byp (Service Bypass) menu

In this menu, you can edit the Service Bypass points.
Service Bypass
B91x/B92x keypads use of Service Bypass to bypass points
1.
2.
3.
4.
5.
B93x/B94x keypads use of Service Bypass to bypass points
1.
2.
3.
4.
5.
19.5

[5] Versions menu

Use the Versions menu to view control panel version information.
Versions
B91x/B92x keypads use of Versions
1.
2.
Bosch Security Systems, Inc.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [3] Diags Menu > [4] IP Camera. The keypad shows one of the following statuses:
– Not Configured
– Not responding
– Bad Password
– Online
– Missing
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [3] Diags Menu > [4] IP Camera. The keypad shows one of the following statuses:
– Not Configured
– Not responding
– Bad Password
– Online
– Missing
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [4] Srvc Byp. If no points have been bypassed the keypad shows No points
bypassed. If points are bypassed, the keypad lists the number of bypassed points.
Enter number for the point to bypass, and then press [ENTER] to select the point.
Press [ENTER] to bypass the point. The keypad shows Parameter Saved, and then returns
to the point you just bypassed.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [4] Srvc Byp menu. If no points have been bypassed the keypad shows No points
bypassed. If points are bypassed, the keypad lists the number of bypassed points.
Enter number for the point to bypass, and then press [ENTER].
Press [Bypass] to bypass the point. The keypad shows Parameter Saved, and then returns
to the point you just bypassed.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [5] Versions.
Installation and System Reference Guide
Keypad Installer menu | en
2015.07 | 12 | F.01U.287.180
141