Control Panels
3.
20.3.5
[5] Cloud
Cloud
1.
2.
3.
4.
5.
6.
20.4
[4] Service Bypass (Serv Byp) menu
In this menu, you can edit the Service Bypass points.
Service Bypass
1.
2.
3.
4.
5.
20.5
[5] Versions menu
Use the Versions menu to view control panel version information.
Versions
1.
2.
3.
4.
Bosch Security Systems, Inc.
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [3] Diagnostics Menu > [5] Cloud. The keypad shows the Cloud ID, which is also
on a label on the control panel.
Press
/Next. The keypad shows the Cloud configuration, which is one of the following:
– Not Available
– Enabled on Ethernet
– Enabled on Cellular
– Enabled on Ethernet and Cellular
Press
/Next. The keypad shows the Cloud Certificate status, which is one of the
following:
– Not Installed
– Certificate Valid
Press
/Next. The keypad shows the Cloud state, which is one of the following:
– Connected (and through which method)
– Not Ready
– Disconnected
– Not Available
– Trying to Connect
When finished viewing the information, escape from the menu.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [4] Service Bypass. If no points have been bypassed the keypad shows No points
bypassed. If points are bypassed, the keypad lists the number of bypassed points.
Enter number for the point to bypass, and then press Enter to select the point.
Press Enter to bypass the point. The keypad shows Parameter saved , and then returns
to the point you just bypassed.
Escape from the menu.
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [5] Versions.
Depending on keypad model:
Press the icon or softkey for the item for which you want view the version.
-or-
Use
/Previous or
/Next to scroll through the list of items for which you can view the
version. Press Enter to view the version.
Escape from the menu.
Installation Manual
Keypad Installer menu | en 123
2017.04 | 15 | F.01U.287.180