Processor Specifications; System Battery Specification; Memory Specifications; Raid Controller - Dell E01B002 Owner's Manual

Processor specifications

The PowerEdge FC430 system supports up to two Intel Xeon E5-2600 v4 processors.

System battery specification

The PowerEdge FC430 system supports CR 2032 3.0-V lithium coin cell system battery.

Memory specifications

The PowerEdge FC430 system supports DDR4 registered DIMMs (RDIMMs and LRDIMMs).
Table 10. Memory specifications
Memory module sockets
Eight 288-pin

RAID controller

The PowerEdge FC430 system supports PERC S130 controller.

Drive specifications

SSD specification

The PowerEdge FC430 system supports up to two 1.8-inch uSATA SSDs.

Ports and connectors specifications

USB ports

The PowerEdge FC430 system supports:
● One 4-pin, USB 3.0 compliant port
● USB management port or iDRAC Direct port which supports USB 2.0 compliant port

QSFP+ port

The QSFP+ port is used for Infiniband or Ethernet.

PCIe Mezzanine card

The PowerEdge FC430 system supports one PCIe x8 mezzanine slot supporting a single or dual port InfiniBand mezzanine card.
14 Technical specifications
Memory capacity
4 GB, 8 GB, 16 GB, and 32 GB
(RDIMMs)
64 GB (LRDIMM)
Minimum RAM
4 GB (RDIMM)
64 GB (LRDIMM)
Maximum RAM
256 GB (RDIMM)
512 GB (LRDIMM)