Removing The Sd Card Reader Support Bracket - Dell PowerEdge C8000 Hardware Owner's Manual

5 Replace the mezzanine card. See "Installing the Infiniband Mezzanine
Card" on page 154 or "Installing the 10 GbE Mezzanine Card" on
page 157.
6 Replace the front cover. See "Installing the Front Cover" on page 133.
7 Replace the sled. See "Installing a Sled" on page 130.

Removing the SD Card Reader Support Bracket

1 Remove the sled from the enclosure. See "Removing a Sled" on page 129.
2 Remove the front cover. See "Removing the Front Cover" on page 132.
3 Remove the mezzanine card. See "Removing the 10 GbE Mezzanine Card"
on page 155 or "Removing the Infiniband Mezzanine Card" on page 151.
4 Remove the SD card reader. See "Removing the SD Card Reader" on
page 158.
5 Remove the two screws securing the SD card reader support bracket. See
Figure 3-26.
6 Lift the support bracket out of the sled tray. See Figure 3-26.
Figure 3-26. Removing and Installing the SD Card Reader Support Bracket
1 screws (2) 2 SD card reader support bracket
Installing System Components
161