Loading paper and specialty media
Do not force paper or specialty media into the multipurpose feeder.
Make sure the paper or specialty media is below the maximum paper ﬁll indicator located on the
paper guides. Overﬁlling may cause paper jams.
Load paper, transparencies, and card stock with the recommended printable side faceup and the top
edge entering the printer ﬁrst. For more information on loading transparencies, see the packaging that
the transparencies came in.
Note: When loading A6‑size paper, make sure the multipurpose feeder extender rests lightly against
the edge of the paper so that the last few sheets of paper remain in place.