Copying Printer Settings To Other Printers - Dell S2830dn User Manual

Managing the printer
•
The percentage of estimated remaining supply that prompts the alert can be set on some supplies for
some supply conditions.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Print Settings > Supply Notifications.
3
From the drop‑down menu for each supply, select one of the following notification options:
Notification
Off
SNMP Only
E‑mail Only
Warning
1
Continuable Stop
Non Continuable Stop
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit.

Copying printer settings to other printers

Note: This feature is available only in network printers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click the Copy Printer Settings.
3
To change the language, select a language from the drop-down menu, and then click Click here to submit
language.
4
Click Printer Settings.
Description
The normal printer behavior for all supplies occurs.
The printer generates a simple network management protocol (SNMP) alert when the
supply condition is reached. The status of the supply will appear on the menus page
and status page.
The printer generates an e-mail when the supply condition is reached. The status of
the supply will appear on the menus page and status page.
The printer displays the warning message and generates an e‑mail about the status
of the supply. The printer does not stop when the supply condition is reached.
The printer stops processing jobs when the supply condition is reached, and the user
needs to press a button to continue printing.
1,2
The printer stops when the supply condition is reached. The supply must be replaced
to continue printing.
96