Understanding the printer menus
Job Accounting menu
Note: This menu item appears only when an optional ﬂash memory card is installed.
Job Accounting Log
Job Accounting Utilities
Accounting Log Frequency
Log Action at End of Frequency
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Log Near Full Level
1–49 for optional ﬂash memory
Establish the font search order.
Resident is the factory default setting.
This menu item is available only when a formatted ﬂash memory card
is installed and operating properly.
Make sure the ﬂash memory card is not read/write‑, write‑, or
Job Buffer Size must not be set to 100%.
Determine and set if the printer creates a log of the print jobs it receives.
Note: Off is the factory default setting.
Print and delete log ﬁles or export them to a ﬂash drive.
Determine and set how often a log ﬁle is created.
Note: Monthly is the factory default setting.
Determine and set how the printer responds when the frequency threshold
Note: None is the factory default setting.
Specify the maximum size of the log ﬁle before the printer executes the Log
Action at Near Full.
Note: 5 is the factory default setting.