Dell S2830dn User Manual page 71

Understanding the printer menus
Use
Print Area
Normal
Whole Page
Download Target
RAM
Flash
Resource Save
On
Off
To
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to
print data on the non‑printable area defined by the
Normal setting, the printer clips the image at the
boundary.
•
Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting. This
setting affects only pages printed using a PCL 5
interpreter and has no effect on pages printed using the
PCL XL or PostScript interpreter.
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in
the RAM is temporary.
•
Storing downloads in a flash memory places them in
permanent storage. Downloads remain in the flash
memory even when the printer is turned off.
•
This menu item appears only when an optional flash
memory is installed.
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a print job that requires more than the available
memory.
Notes:
•
Off is the factory default setting. Off sets the printer to
retain downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
•
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
71