Additional Printer Setup; Installing Internal Options; Available Internal Options; Accessing The Controller Board - Dell S2830dn User Manual

Table of Contents

Additional printer setup

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware

or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power

cord from the electrical outlet before continuing. If you have any other devices attached to the printer,

then turn them off as well, and unplug any cables going into the printer.

•

Flash memory

–

Fonts

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware

or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power

cord from the electrical outlet before continuing. If you have any other devices attached to the printer,

then turn them off as well, and unplug any cables going into the printer.

Open the controller board access door.

Locate the memory card connector.

Warning—Potential Damage: Controller board electronic components are easily damaged by static

electricity. Touch a metal surface on the printer before touching any controller board electronic

components or connectors.

Table of Contents