Dell S2830dn User Manual page 109

Troubleshooting
•
Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to
Universal, then make sure the paper is large enough for the data being printed.
•
Cancel the print job.
Insufficient memory to support Resource Save feature [35]
Try one or more of the following:
•
From the printer control panel, press
printing.
•
Install additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, press
collating the rest of the print job.
•
Cancel the current print job.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, press
Insufficient memory, some held jobs will not be restored [37]
Do either of the following:
•
From the printer control panel, press
•
Delete other held jobs to free up additional printer memory.
Load multipurpose feeder with [custom type name] [orientation]
Try one or more of the following:
•
Load the multipurpose feeder with the correct size and type of paper.
•
From the control panel, press
Note: If no paper is loaded in the multipurpose feeder, the printer manually overrides the request,
and then prints from an automatically selected tray.
•
Cancel the current job.
to disable Resource Save, clear the message, and continue
to print the portion of the job already stored and begin
to clear the message.
to clear the message.
to clear the message and continue printing.
109