Setting The Country Code - Advanced Energy AE 3TL 600 Series Installation And Operation Manual

Advanced Energy
Table 5‑3. Inverter menus (Continued)
Menu Options
Configuration
Device Information

SETTING THE COUNTRY CODE

The country code is not preset at the factory, so must be set the first time the inverter
is operated. The country code determines the following for each inverter:
• Determines the utility monitoring parameters for the country where the inverter
is installed.
• Sets the menu language.
☞
Important
If an AE 3TL inverter is operated with the wrong country code, the utility
company may revoke the operating license. The manufacturer disclaims all
liability for operation of any AE solar inverter with the wrong country code.
☞
Important
After setting and confirming the country code, you can no longer alter the
country code. This also applies to devices that are, or were, in operation. The
country code can only be changed by factory-trained service personnel.
5‑8
The following parameters can be configured:
• Languages
• Communication: Ethernet, USB, RS485
• Date/time
• Portal settings: Activation, Configuration data, Server IP,
Server port, Portal text
• Extended: Update, Clear data logger, Numerical list
• Password
Displays the following information:
• Version number
• Country
• Current language
• Device type
• Serial number
Operating
Description
570-1003552-05A