Advanced Energy AE 3TL 600 Series Installation And Operation Manual page 73

To Set the Country Code
Immediately after the DC voltage is switched on for the first time, a window appears
on the display requesting confirmation of the country code. You can select one of the
listed countries. The term "country code", however, is not shown in the menu. The
display lights up the first time you press the button.
1. Highlight the country code for your install location using the ▲ and ▼ buttons.
READY
2. Press the enter button to select the country code.
3. A second prompt displays, requesting confirmation of the country code. Press
enter to confirm the country code.
After the country code has been confirmed, it can no longer be changed except
by factory-trained service personnel. This also applies to devices that have
previously been in operation.
READY
☞
Important
570-1003552-05A
ON ALARM EARTH FLT
Canada
France
Germany
USA
USA
F1-Menu
F1 F2
ESC
Down
Escape key
ON ALARM EARTH FLT
Accept ?
Yes = Enter
No = Esc
F1 F2
ESC
If this is not the country code you want to select, press the ESC button to
cancel. In this case you cannot put the inverter into operation, nor can
you continue working in the menu.
Advanced Energy® AE 3TL Inverters
Up
Enter
Operating 5‑9