◦ Status LED Ready is continuously lit.
◦ Status LED ON flashes.
☞
Important
6. Verify the feed-in operation has started by checking the following:
◦ Status LED Ready goes off.
◦ Status LED ON is continuously lit.
Under normal operating circumstances, this procedure takes approximately five
minutes.
CONTROL PANEL
The control panel located on the front of the AE 3TL inverter provides a display,
LEDs, and control buttons. The display provides the following information:
• Operation status
• Monitoring parameters
• System faults
• Inverter information
The control panel is only active when the inverter has DC voltage.
READY
Analysis
Actual Value
Failure Memory
Configuration
Device Information
F1-Menu
F1
ESC
Figure 5‑1. Inverter display and control keys
570-1003552-05A
When the solar array voltage is greater than 200 V, the startup procedure
starts.
ON
ALARM
EARTH FLT
F2
Scroll right key
Down key
Scroll left key
Escape key
Advanced Energy® AE 3TL Inverters
LED indicators
Digital display
Up key
Enter key
Operating
5‑5