Figure 5‑7. Previous day's feed-in power
3. Press the ESC button to return to the basic operating screen.
The inverter stores data which records measured values while the inverter is
running. The default configuration includes 16 measurement channels.
Table 5‑4. Data storage
1 minute
5 minutes
10 minutes
CONFIGURING THE INVERTER
The following configuration settings can be set up or modified:
• Date and time
• Menu language
• Communication options
• Portal settings
To Enter the Password
The inverter password is required to configure the inverter and to make changes to
the parameters.
☞
Important
The default password is set at the factory to 72555.
1. Press the F1 button to display the main menu.
2. Press the ▼ button until Configuration is highlighted and press the enter
button.
3. Press the ▼ button until Password is highlighted and press the enter button.
The Password Input screen displays.
570-1003552-05A
Logging Cycle
Operating
Advanced Energy® AE 3TL Inverters
Length of Storage Time
6 months
2.5 years
5 years
5‑13