Dc Connections; Table 4-2. Maximum Dc Operating Data - Advanced Energy AE 3TL 600 Series Installation And Operation Manual

Advanced Energy
AVERTISSEMENT:
Prendre les mesures de précaution adéquates; cette partie contient de
hautes tensions pouvant causer des blessures graves ou entraîner la mort.
WARNING:
All electrical installations should be completed in accordance with national
and local electrical codes. The inverter must be connected to a dedicated
circuit with no other outlets or devices connected to the same circuit.
AVERTISSEMENT:
Tous les travaux électrique doivent être effectués conformément aux codes
de l'électricité national et local. L'onduleur doit être branché sur un circuit
dédié ne comprenant aucune autre sortie ou aucun autre dispositif
connecté(e) au même circuit.
Observe the following requirement when selecting the DC conductor:
• Use 12 AWG to 8 AWG (4 mm² to 10 mm²) copper wire, rated for 90°C
(194°F)
DC conductors should be installed per NEC 690.35.
The inverter should not exceed the following operating data regardless of the
operating circumstances:
Table 4‑2. Maximum DC operating data
Maximum per Fuse Bank
DC voltage
DC operating current

DC Connections

DANGER:
Electrical connections must comply with national and local standards.
Voltage drop and other considerations may dictate that larger wire sizes be
used.
4‑16
600 series: 500 V
1000 series: 1000 V
Installing
12kW 16kW
27.5 A 33.0 A
20kW 23kW
37.5 A 40.0 A
570-1003552-05A