Uninstalling Cet; Installing Connectivity Packages - ABB SPA-ZC 402 Installation And Commissioning Manual

1MRS755380
3.3.3.
3.4.
SPA/ Ethernet Adapter
Installation and Commissioning Manual

Uninstalling CET

1. Open the Add or Remove Programs dialog by selecting Start > Settings >
Control Panel > Add or Remove Programs in the Windows task bar.
2. Select CET and click Remove, see Fig. 3.3.3.-1.
Note that the uninstallation only removes CET, in order for you to
install a new version and to update the software. It does not remove
the Microsoft SQL Server and .NET Framework. Removing these
programs may infect the functionality of the other ABB applications.
Fig. 3.3.3.-1 Add or Remove Programs dialog
Detailed instructions for upgrading the software will be provided
when the upgrade is available.

Installing Connectivity Packages

1. Close all the open programs.
The connectivity packages for a set of ABB IEDs can be found at the
internet address: http://www.abb.com/substationautomation. Please
contact ABB to check the connectivity package's status for the IED
in question.
2. Double-click the Connectivity Package installation program and select the
relevant IED (.msi) to start the installation.
It is recommended to install the Connectivity Package after
installing the Communication Engineering Tool (CET), see Section
3.3.2. Installing CET. If this is not the case, re-install the
Connectivity Package after installing the CET.
3. First, the installation wizard extracts the installation files to your local computer.
SPA-ZC 402
A040012
25