Chapter 5 Web Console Configuration - Moxa Technologies NPort W2250 Plus User Manual

The Web Console is the most user-friendly method available to configure NPort W2250/2150.
This chapter introduces the Web Console function groups and function definitions.
The following topics are covered in this chapter:
Configuring Your Browser
Basic Settings
Network Settings
Serial Port Settings
System Management
Change Password
Load Factory Default
Save/Restart
NOTE
You may use either a cross-over or straight-through Ethernet cable to connect NPort
W2250/2150 to a PC, Hub, or Switch. NPort W2250/2150's Ethernet port will auto-detect which
type of cable is being used, and then adjust the signals accordingly.
Web Console Configuration
Chapter 5
Time Settings
Web/Telnet Console
General Settings
Ethernet Configuration
WLAN Configuration
Operation Modes
Communication Parameters
Accessible IP Settings
SNMP Agent
Auto Warning Settings
System Status
5
5