Reset To Factory Defaults; Change Your Login Password - TRENDnet TEW-730APO User Manual

TRENDnet User's Guide
Reboot your access point
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.

Disconnect the power adapter – Located on the rear panel of your router, see
"Product Hardware Features" on page 4 .
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
Disconnect the power adapter from the power port of your router for 10
seconds, then, plug the power adapter back into the power of your router.
Wait for your router Status light to begin flashing.
OR

Router Management Page – This is also known as a soft reboot or restart.
Toolbox > Reboot
1. Log into the management page (see
2. Click on Management, and click on Configuration File.
3. Click Yes or OK if prompted to your reboot your device.

Reset to factory defaults

You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
"Backup and restore your router configuration settings" on page 70.
There are two methods that can be used to reset your router to factory defaults.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 9).

Reset Button – Located on the bottom panel of the access point, cap must be
removed to access reset button. Use this method if you are encountering
difficulties with accessing your router management page. Push and hold this
button for 15 seconds and release to reset your router to its factory defaults.
OR

Router Management Page
Management > Configuration Filet
1. Log into the management page (see
2. Click on Management, and click on Configuration File.
3. You will be prompted to reset your router to factory defaults. Click Yes or OK.

Change your login password

1. Log into the management page (see
2. Click on Management, and click on Password Settings. Click Apply to save changes.
TEW-730APO
Bottom cap remove
"Access the management page" on page 9).
"Access the management page" on page 9).
49