Device Name; Reset To Factory Defaults; Backup And Restore Your Configuration Settings - TRENDnet TEW-921DAP User Manual

TRENDnet User's Guide
•
Account: Change the login user name in this field
•
Password: Change the login password in this field
•
Idle Timeout: Change the length of time that the access point can idle before
timing out. The duration can be between 120 – 3600 seconds. (By default it is
set to 120 seconds)

Device Name

Management > Administration
1. Log into your management page (see
2. Click on the Management tab and click Administration.
3. In the Device Name field, change the name of the device (eg: room, office etc)
4. Click on Apply button to apply the settings and then click on the Save button located
on the top right section to save the settings.

Reset to factory defaults

Management > Backup/Restore Settings
You may want to reset the access point to factory defaults if you are encountering
difficulties and have attempted all other troubleshooting. Before you reset to defaults, if
possible, you should backup your access point's configuration first.
There are two methods that can be used to reset your access point to factory defaults.
• Reset Button: Located on the side of the access point, (see
Features" on page 5). Use this method if you are encountering difficulties with
accessing your router management page.
OR
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access the management page" on page 13).
"Product Hardware
• Access Point Management Page
1. Log into your management page (see
2. Click on the Management tab and click Backup/Restore Settings.
3. Click Load Default. If prompted, click Yes or Ok.

Backup and restore your configuration settings

Management > Backup/Restore Settings
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
To back up your configuration:
1. Log into your management page (see
2. Click on the Management tab and click Backup/Restore Settings.
3. Click Export.
4. Click on Apply button to apply the settings and then click on the Save button located
on the top right section to save the settings.
5. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default download folder. (Default Filename: config.bin)
TEW-921DAP
"Access the management page" on page 13).
"Access the management page" on page 13).
39