Virtual Ac + Thin Ap; Ap Management; System Setting - TRENDnet TEW-730APO User Manual

TRENDnet User's Guide

Virtual AC + Thin AP

In this mode the access point becomes the virtual access controller and also a thin
access point. Virtual access controller allows you to control all compatible thin access
points connected in your network.
Configuration
1. Log into the management page (see
2. Your access point will prompt you for a user name and password.
3. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
4. Click the System button on the left side and then System Settings.
5. Select Virtual AC + Thin AP in the Device Mode drop down menu and Select your
Country/Region.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 9).

AP Management

This page displays thin access points connected in the network.
1. Log into the management page (see
2. Click on Management section and AP Management.
3. Select the access point you would like to configure.
 Restart: Click this option to restart the selected device(s)
 Rename: Click this option to rename the selected access point
 Set IP: Click this option to change the IP address of the selected device
 Radio: Select this option to change the wireless radio settings of the selected
device
 Upgrade Selected: Select this option to upgrade the selected devices
 Upgrade All: Select this option to upgrade all devices
 Refresh: Click to refresh the access point list

System Setting

This page displays thin access points connected in the network.
1. Log into the management page (see
2. Click on Management and System Settings.
Device Settings
 Device Mode: Select the mode you would want the access point to operate on.
TEW-730APO
"Access the management page" on page 9).
"Access the management page" on page 9).
46