Advance Settings; Setting Time - TRENDnet TEW-730APO User Manual

TRENDnet User's Guide
 Connect Mode: Select the mode the access controller will be connected
 Device Name: Enter the name of the device
 Spanning Tree: Select to enable Spanning Tree feature
 STP Forward Delay: Enter the delay time duration
Enable VLAN
 Enable 802.1Q VLAN: Select to enable VLAN feature
 VLAN ID: Enter the assigned VLAN ID of the access controller
IP Address
 DHCP Client: Select to have access controller to receive IP address from your
DHCP server
 Static: Select this option to manually configure the access point's IP address.
o IP Address: Enter the IP address to assign
o Subnet Mask: Enter the subnet mask of the access point
o Gateway IP Address: Enter the gateway IP address
o DNS1-2: Enter the DNS IP address to assign on the access point.
© Copyright 2015 TRENDnet. All Rights Reserved.
DHCP Server
 DHCP Client: Select to enable DHCP server
o DHCP IP Address Range: Enter the DHCP IP range to assign
o Subnet Mask: Enter the Subnet mask to assign DHCP clients
o Lease Time: Enter the lease time duration for DHCP clients.
ZNMP
 ZNMP Survey Interval: Enter the survey time interval
o P Address: Enter the IP address to assign
o Subnet Mask: Enter the subnet mask of the access point
o Gateway IP Address: Enter the gateway IP address

Advance Settings

Setting time

1. Log into the management page (see
2. Click on System, and click on Time Settings.
TEW-730APO
"Access the management page" on page 9).
47