Ping Tool; Device Information - TRENDnet TEW-730APO User Manual

TRENDnet User's Guide
 Time: Displays the date and time of the log entry. If the time is inaccurate, make
sure to set the router date and time correctly. (See
 Source: Source of the log entry
 Message: Displays the log message.
 Refresh: Click to refresh the displayed log entries
 Clear: Click to clear all current log entries

Ping Tool

You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (demilitarized zone) feature
that makes all the ports and services available on the WAN/Internet side of the router
and forwards them to a single IP address (computer or network device) on your
network. The DMZ feature is an easy way of allowing access from the Internet however,
it is also very insecure method.
1. Log into the management page (see
2. Click on Tools, and click on Ping. Click Apply to save settings.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Setting time" on page 51)
"Access the management page" on page 9).
 Ping Address: Enter the IP address to ping
 Ping Count: Enter the ping count to conduct
 Data Size: Enter the data size to ping

Device Information

1. Log into the management page (see
2. Click on Status, and click on Information.
System Information
 Firmware Version: Current firmware version of the access point.
 MAC Address: MAC address of the access controller
 Device Name: Assigned name of the device
IP Settings
 IP Address: Assigned IP address of the access controller
 Subnet Mask: Assigned subnet mask of the access controller
TEW-730APO
"Access the management page" on page 9).
41