System Setting - TRENDnet TEW-730APO User Manual

TRENDnet User's Guide
5. Select Virtual AC in the Device Mode drop down menu and Select your
Country/Region.

System Setting

This page displays thin access points connected in the network.
1. Log into the management page (see
2. Click on Management and System Settings.
Device Settings
 Device Mode: Select the mode you would want the access point to operate on.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 9).
 Connect Mode: Select the mode the access controller will be connected
 Device Name: Enter the name of the device
 Spanning Tree: Select to enable Spanning Tree feature
 STP Forward Delay: Enter the delay time duration
Enable VLAN
 Enable 802.1Q VLAN: Select to enable VLAN feature
 VLAN ID: Enter the assigned VLAN ID of the access controller
IP Address
 DHCP Client: Select to have access controller to receive IP address from your
DHCP server
 Static: Select this option to manually configure the access point's IP address.
o IP Address: Enter the IP address to assign
o Subnet Mask: Enter the subnet mask of the access point
o Gateway IP Address: Enter the gateway IP address
o DNS1-2: Enter the DNS IP address to assign on the access point.
DHCP Server
TEW-730APO
36