Table of Contents
Advertisement
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
D.4.16.2 Configuring Triggers
Viewing the Trigger Configuration
The trigger on NEO is configured using the Manage Triggers applet. The Teklogix Imagers
applet provides a shortcut to the Manage Triggers applet.
•
In the Advanced tab, tap on the Trigger Control button.
•
To view all the triggers and the hardware devices that are configured to use them, tap in
the checkbox next to Show all modules.
Adding, Editing and Removing Triggers
For instruction about adding, editing and removing triggers, refer to "Manage Triggers" on
page 98.
D.5
Bar Code Symbologies – Descriptions
To view all symbologies available for the imager:
•
Tap on the Barcoding tab, and tap on All.
Note: Remember that if you want to edit the symbologies, the preset you want to
D-20
Psion Teklogix NEO Hand-Held Computer User Manual
change must be active. Highlight the preset you want to edit, and tap on the
Activate button – an A is added at the far right of the preset. With the activated
preset highlighted, double-tap on the Edit button.
Advertisement
Table of Contents
Troubleshooting
