Table of Contents
Advertisement
Chapter 4: Working With Windows CE 5.0
Security Settings
•
In the Password field, type the Supervisor level password. The default password is
123456.
•
Tap on OK. You can now access all menu items in the Start Menu along with the icons
in the taskbar.
Changing a Password
Note: Keep in mind that this is the same password as that assigned through the Password
control panel applet. Refer to "Control Panel Icons" on page 74.
To assign a password:
•
Choose a security level, and enter the existing password in the Password field.
•
Tap on the Set Password button.
A dialog box labelled Password Properties is displayed.
•
Type the new password in the Password: text box (all keyboard characters are valid).
•
In the Confirm Password: text box, retype the new password.
Configuring Security
Choosing the Configure button displays the Configure Security dialog box.
This dialog box allows you to determine which security levels will have an associated icon
displayed in the taskbar. By default, a security icon is not displayed for user-level security.
Note: It is recommended that you enable 'Allow Teklogix Security Level' so that autho-
rized Psion Teklogix service personnel can access your unit should it require
maintenance.
60
Psion Teklogix NEO Hand-Held Computer User Manual
Advertisement
Table of Contents
Troubleshooting
