Table of Contents
Advertisement
•
Scanner is used to create a seamless connection between the incoming Bluetooth bar
code and NEO.
Once you've completed the information:
•
Tap on Next and then in the Services screen, click on Done.
5.6.3
Servers Tab
When a remote Bluetooth device initiates a Bluetooth connection to NEO, the remote device
is considered the 'Bluetooth master' and the hand-held, the 'Bluetooth slave'. In order for
the remote device to connect to NEO, it must offer a service in the form of a server. The
Servers tab allows these services to be enabled and configured. There are three server ser-
vices available: Serial, Scanner and OBEX OPP.
Serial server enables the Serial Port Profile server; a Serial Port can be selected from the
drop-down menu. Keep in mind that when a port is chosen, an application must be open
(connected) to the chosen port for a remote device to be able to connect.
Scanner server enables a Serial Port Profile server and then relays it to the Scanner Service
(SCS). This is used for Bluetooth bar code scanners that operate in client mode. SCS opens
the server port and handles the scanner input.
OBEX OPP server enables the Object Push Profile server. A warm reset must be performed
on NEO after a change is made to this option. The OPP Server allows other Bluetooth
devices to send files to this device.
•
Tap on the checkbox to activate the server – the associated port name is displayed beside
the server name.
Psion Teklogix NEO Hand-Held Computer User Manual
Chapter 5: Configuration
Servers Tab
109
Advertisement
Table of Contents
Troubleshooting
